Product
Background Checks
Manage your employment screening program easily and more efficiently with GoodHire’s award-winning advanced platform.
Resources
Content
Access our full library of content to learn about hiring trends, screening compliance, and how GoodHire works.
LOG IN

Resourcesarticles

10-Panel Drug Test: What It Screens For and When to Use It

Illustration of a sealed specimen cup, a 10-panel drug test cassette, a lab flask and a clipboard with a green check mark.

A 10-panel drug test is a lab screen, usually of a urine sample, that checks for 10 drug classes: marijuana (THC), cocaine, amphetamines, opiates, phencyclidine (PCP), benzodiazepines, barbiturates, methadone, methaqualone and propoxyphene. Employers use it outside DOT testing when they want to cover commonly misused prescription sedatives as well as the five drugs on a standard 5-panel.

Key Takeaways

  • A 10-panel test covers the five classes on a standard 5-panel plus benzodiazepines, barbiturates, methadone, methaqualone and propoxyphene.
  • No federal rule requires a 10-panel test. DOT-covered roles need a separate DOT test, and a 10-panel test cannot replace it.
  • A standard 10-panel does not test for alcohol, nicotine or fentanyl, and its opiates screen may not detect oxycodone unless the lab adds an expanded opioid test.
  • In urine, most of the ten classes are detectable for days, not weeks. Heavy marijuana use, some benzodiazepines, phenobarbital and PCP can stay detectable longer.
  • A lab screen is not a final result. Positive screens are usually confirmed by a second lab method, and a Medical Review Officer (MRO) checks for a legitimate medical explanation before the employer gets a verified result.

Get A Background Check Today

Get Started

What Does a 10-Panel Drug Test Screen For?

The first five classes are the same ones found on a standard 5-panel test. The other five are mainly prescription sedatives and opioids, plus two drugs that are no longer marketed in the U.S. GoodHire’s drug testing page lists the same ten substances for its 10-panel test.

Drug classExamplesWhat employers should know
Marijuana (THC)Marijuana and other THC productsThe lab looks for a THC metabolite. Some states and cities limit testing for marijuana or acting on the result.
CocainePowder cocaine, crackThe lab looks for the metabolite benzoylecgonine.
AmphetaminesAmphetamine, methamphetamine; some panels also cover MDMA, as the DOT panel doesPrescription stimulants can produce a true positive, and some cold medicines can trigger a positive screen that confirmation testing rules out.
OpiatesCodeine, morphine, heroin (detected through its breakdown products)A typical opiates screen reports only codeine and morphine. Oxycodone and hydrocodone may need an expanded opioid test.
Phencyclidine (PCP)PCPCan stay detectable for weeks after chronic use.
BenzodiazepinesAlprazolam (Xanax), diazepam (Valium), clonazepam (Klonopin), lorazepam (Ativan)Many screens target one breakdown product, so some benzodiazepines, including clonazepam and lorazepam, can be missed.
BarbituratesPhenobarbital, pentobarbital, secobarbitalLong-acting phenobarbital can stay detectable for weeks.
MethadoneMethadoneA synthetic opioid that standard opiates screens are not built to detect, which is why it has its own position.
MethaqualoneQuaaludesA Schedule I controlled substance since 1984, with no accepted medical use in the U.S.
PropoxypheneDarvon, DarvocetThe FDA asked makers to withdraw it from the U.S. market in November 2010.

The examples and detection notes above come from SAMHSA’s guide Clinical Drug Testing in Primary Care, the DEA’s scheduling history and the FDA’s propoxyphene withdrawal notice. Exact coverage depends on the lab’s test design, so ask your provider which compounds each panel detects.

What a 10-Panel Test Does Not Cover

Because two of the ten positions test for drugs that are rarely prescribed or sold today, it helps to know what the panel leaves out:

  • Alcohol. Alcohol testing is separate, usually by breath or blood. Alcohol clears the body within hours, so it is a poor fit for a urine drug panel.
  • Fentanyl, tramadol and buprenorphine. These are not among the ten classes. Synthetic opioids such as fentanyl need their own tests.
  • Oxycodone and similar opioids. Whether these show up depends on whether the lab’s opiates screen is expanded. A basic opiates screen can read negative after oxycodone use.
  • Nicotine. Nicotine or its breakdown product, cotinine, requires a separate test.

If any of these matter for a role, ask your provider whether an expanded opioid test or a different panel is available, and write the panel you choose into your policy.

What Specimen Types Can a 10-Panel Test Use?

Urine is the most common specimen for a 10-panel test. For a lab-based urine test, collection happens at a collection site, with a chain of custody form that tracks the sample to the lab.

Other specimen types change what the test can show:

  • Urine: an intermediate window, typically days, longer for some drugs after heavy use.
  • Hair: the longest window. Most labs test about 90 days (three months) of hair growth, but use in the last 7 to 10 days may not appear yet. See GoodHire’s guide to the hair follicle drug test.
  • Oral fluid (saliva): a short window, useful for recent use.
  • Blood: a short window.

How Long Does a 10-Panel Drug Test Detect Drugs?

Detection windows show how long a drug or its breakdown product may stay in urine above the lab’s cutoff. They do not show when someone was impaired. SAMHSA notes that urine drug levels usually do not correlate well with impairment.

How far back does a 10-panel urine test go? For most of the ten drug classes, about 1 to 3 days after use. Methadone can show for up to about 11 days at a maintenance dose, and chronic heavy marijuana use, chronic PCP or benzodiazepine use and phenobarbital can stay detectable for weeks. A hair test looks back further, about 90 days.

Drug classApproximate urine detection window
Marijuana (THC)Up to 3 days after a single use; up to 10 days after heavy use; 30 to 36 days after chronic heavy use
Cocaine1 to 3 days
AmphetaminesAbout 1 day after a single dose; 2 to 4 days after chronic high-dose use
Opiates (codeine, morphine)1 to 2 days
PCP1.5 to 10 days after casual use; several weeks after chronic use
BenzodiazepinesUp to 24 hours (short-acting, such as triazolam); 1 to 12.5 days (intermediate, such as alprazolam); up to 30 days after chronic misuse
Barbiturates4 to 6 days (short-acting); 10 to 30 days (phenobarbital)
Methadone3 to 11 days at a maintenance dose
Methaqualone and propoxypheneNot listed in SAMHSA’s guide; both are rarely encountered because neither is marketed in the U.S.

Source: SAMHSA, Clinical Drug Testing in Primary Care (2012). Dose, frequency of use, hydration, metabolism and the lab’s cutoff levels all change the actual window.

10-Panel vs. 5-Panel: Which Should You Choose?

The 10-panel keeps everything on the 5-panel and adds prescription sedatives, methadone and the two older drugs. GoodHire’s 5-panel drug test guide covers that test in detail.

Question5-panel10-panel
Drug classesMarijuana, cocaine, amphetamines, opiates, PCPThe same five plus benzodiazepines, barbiturates, methadone, methaqualone, propoxyphene
Covers commonly misused sedatives?NoYes, benzodiazepines and barbiturates
Includes marijuana?YesYes
Satisfies DOT testing rules?Only when run as a DOT test under 49 CFR Part 40No. It is a non-DOT test
Detects fentanyl?NoNo

Decision Steps for Employers

  1. Check whether the role is covered by DOT rules. If it is, you need a DOT drug test. DOT rules require DOT tests to be completely separate from non-DOT tests, and a DOT specimen cannot be tested for additional drugs. If you also want a 10-panel for the same employee, it must be a separate collection under your own policy. See GoodHire’s guide to the DOT drug test.
  2. Decide whether prescription sedatives matter for the job. If employees handle controlled medications (for example, in pharmacies or care facilities) or perform safety-sensitive work where sedation is a concern, the extra classes on a 10-panel may be relevant. If not, a 5-panel may be enough.
  3. Check marijuana rules where you hire. Some states and cities limit pre-employment marijuana testing or adverse action based on off-duty use. GoodHire’s drug testing laws guide tracks these rules. On GoodHire’s drug testing page, the 8-panel plus methaqualone test covers the same substances as the 10-panel except marijuana, and the 4-panel test also leaves out marijuana.
  4. Decide which opioids you need to detect. If oxycodone, fentanyl or other synthetic opioids are a concern, a standard 10-panel may not answer the question. Ask your provider about expanded opioid testing.
  5. Write the choice into your policy. Name the panel for each job category and apply it consistently to everyone in that category.

How Are 10-Panel Results Confirmed and Reported?

A lab-based 10-panel result usually moves through four steps before the employer acts on it:

  1. Collection. The candidate gives a sample at a collection site, and a chain of custody form follows it to the lab.
  2. Initial screen. The lab runs an immunoassay, which sorts samples into negative and presumptive positive. Screens can cross-react with chemically similar substances. For example, SAMHSA notes that some decongestants can register as amphetamine on a screen.
  3. Confirmation. A presumptive positive is retested on a separate portion of the sample with a more specific method, such as gas or liquid chromatography with mass spectrometry. This step identifies the specific drug and its concentration.
  4. MRO review. A Medical Review Officer, a licensed physician, reviews confirmed results and contacts the candidate to ask about prescriptions or other medical explanations. If a valid prescription explains the result, the MRO can report it as negative.

For DOT tests, MRO review is required by federal rule, and the MRO must be a licensed physician (MD or DO). For non-DOT tests, MRO review depends on the provider and your program. GoodHire’s drug testing page says all drug tests run through GoodHire are reviewed by an MRO, and that results are usually shared within three to five days, or up to 10 business days when more testing is needed or the MRO cannot reach the candidate.

Labs also check whether a urine sample is valid. A sample can come back as dilute (watered down, often from drinking a lot of fluid), adulterated (something added to mask drug use), substituted (not consistent with human urine) or invalid (the lab could not get a reliable result). Under DOT rules, which many employers use as a model, a dilute positive counts as a verified positive and an adulterated or substituted sample counts as a refusal to test, while a negative-dilute result may lead to a new collection. For non-DOT tests, your written policy should say what happens after each of these results.

A verified positive tells you a drug or metabolite was present above the cutoff. It does not tell you when the drug was used or whether the person was impaired. GoodHire’s guide on how to read drug test results explains negative and positive results and common causes of false positives.

Before You Act on a Positive Result

  • Wait for the MRO-verified result. A presumptive positive from the initial screen is not a final result.
  • Follow the adverse action process when it applies. If the result came through a consumer reporting agency and you decide not to hire based on it, the Fair Credit Reporting Act (FCRA) requires the adverse action process. This adverse action guide walks through the steps.
  • Check state and local rules. Some jurisdictions add notice requirements or limit action on marijuana results.
  • Apply your written policy. The DOT rules on Substance Abuse Professionals and return-to-duty testing do not apply to non-DOT testing. Your policy and applicable state law set the consequences. GoodHire’s article on failed drug tests covers next steps in more detail.

Setting Up a 10-Panel Testing Program

A 10-panel program needs the same groundwork as any employment drug testing program:

  • A written policy. State which roles are tested, which panel applies to each, when testing happens (for example, after a conditional offer, after an accident or on reasonable suspicion), how results are reviewed and what happens after a positive. Some states, such as Minnesota, require a written policy before testing; consult counsel on the rules where you hire.
  • Notice and consent. Tell candidates that a drug test is part of the process and get their signed consent before testing. Some state laws set specific notice requirements.
  • ADA rules. Under the Americans with Disabilities Act (ADA), a test for illegal drug use is not a medical examination, and the ADA does not protect applicants or employees who currently use illegal drugs. It does protect people who have completed or are in a supervised rehabilitation program and no longer use drugs illegally. Lawful prescription use is different: the EEOC’s guidance on prescription opioids says an employer cannot automatically disqualify someone for lawful use without considering whether they can do the job safely and effectively, unless another federal law disqualifies them.
  • Consistent application. Test everyone in the same job category the same way, at the same stage of hiring.
  • Separate DOT and non-DOT testing. If some roles are DOT-covered, keep those tests under DOT procedures and run any 10-panel testing separately.

Because drug testing rules vary by state and city, review your program with legal counsel before you start or change it.

Frequently Asked Questions

Does a 10-panel drug test detect alcohol?

No. Alcohol is not one of the ten drug classes on a standard 10-panel test. Alcohol testing is ordered separately, usually as a breath or blood test, because alcohol leaves the body within hours.

How far back does a 10-panel drug test go?

In urine, most substances on the panel are detectable for about one to three days. Some stay longer: chronic heavy marijuana use can be detectable for about a month, and phenobarbital, PCP and chronic benzodiazepine use for weeks. A hair test covers roughly the last three months but may miss use in the most recent week or so.

Does a 10-panel drug test detect fentanyl or oxycodone?

Fentanyl is not one of the ten classes and needs its own test. Oxycodone depends on the lab: a basic opiates screen targets codeine and morphine and may not detect it, while an expanded opioid test can. Ask your provider which opioids its panel detects.

Can a prescription or over-the-counter medicine cause a positive result?

It can. Prescribed benzodiazepines, barbiturates or stimulants can produce a true positive, and some cold medicines can trigger a positive amphetamine screen. Confirmation testing identifies the specific drug, and a Medical Review Officer asks the candidate about prescriptions before reporting a verified result to the employer.

Can a 10-panel drug test be used for DOT-regulated jobs?

Not in place of a DOT test. DOT-covered employees must take a DOT drug test under 49 CFR Part 40, and DOT rules require it to be completely separate from any non-DOT test. An employer that also wants 10-panel coverage must run it as a separate test under its own policy.

Disclaimer

The resources provided here are for educational purposes only and do not constitute legal advice. We advise you to consult your own counsel if you have legal questions related to your specific practices and compliance with applicable laws.

Get A Background Check Today

Get Started

About the Author

Tiffany Conaway covers Checkr’s verification and drug testing offerings, along with occupational health screening, post-hire monitoring, and the candidate experience. Her work helps employers build compliant, candidate-friendly screening programs.